Technique of using N95 respirator correctly
Step 1
Wash your hands well before putting on your mask.
Use soap and water and dry your hands well so you don’t get the mask wet. This will prevent you from accidentally contaminating your mask before you put it on
Step 2
Cup the mask in one hand and place it over your mouth and nose.
Place the mask in the palm of your hand so that the straps face the floor. Set it over your nose and mouth with the nosepiece fitting over the bridge of your nose. The bottom should go just under your chin.
Step 3
Pull the bottom and top straps over your head.
If your mask has two straps, pull the bottom one over your head and secure it around your neck, just under your ears. Continue to hold the mask tightly against your face with the other hand. Then, pull the top strap over and set it above your ears
Step 4
Mold the nose piece around the bridge of your nose.
Set your first 2 fingertips on either side of the metal nose clip at the top of your mask. Run your fingers down both sides of the strip, molding it along the bridge of your nose
Step 5
Breathe through the mask and test for leaks.
Set both hands against the mask and take a breath to make sure that it seals against your face. Then exhale, feeling for any leakage from the nosepiece or around the edges. If you feel air leaking from the nose area, re-mold the nosepiece. If it’s coming from the edges of the mask, adjust the placement of the straps on the sides of your head
Step 6
Re-wear your mask as long as it stays dry and fits tightly.
If you’re using the mask to protect from environmental hazards and it hasn’t come into contact with harmful germs, it should be fine to wear again. Test the seal of your mask each time you put it on to make sure it still fits snugly. Store your mask in a clean, sealed container or bag and make sure it doesn’t get bent out of shape by surrounding objects.
Credit to wikiHow
Comments
Post a Comment